Manufacturer |
N/A HTP® |
Number of Elements |
N/A 6 |
Base Model Power |
N/A 18000 W |
Capacity |
N/A 48 gal |
Available Wattage NS |
N/A 18 kW24 kW27 kW30 kW36 kW |
Standard Voltage |
N/A 208 V |
First Hour Rating |
N/A 117 |
Test Pressure |
N/A 300 psi |
Working Pressure |
N/A 150 psi |
Lining Material |
N/A Cobalt Glass |
Number of Phase |
N/A 1 3 |
Equipment Grade |
N/A Commercial |
Industry Standards |
N/A CSA® Certified |
Estimated Shipping Weight |
N/A 230 lb |
Schematic |
N/A
 Schematic Drawing for HTP® Medium and Heavy Duty Commercial Electric Water Heaters |
Dimension A |
N/A 49-1/8 in |
Dimension B |
N/A 22 in |
Dimension C |
N/A 6 in |
Standard Features |
N/A
|
Installation Flexibility |
N/A Factory installed wiring: the junction box and elements are pre-wired, eliminating the need for splicing and taping wires - a pre-installed terminal block for simplicity of installation. |
Models |
N/A 50 model with support inputs from 6 to 54 kW - standard voltages of 208 V, 240 V, 277 V and 480 V in single or three phases. |
Quality Design |
N/A Blue cobalt glass is fused to specially treated thicker gauge steel to provide the best coating available against corrosion - Certified to a test pressure of 300 PSI and working pressure of 150 PSI. |
Single Panel Junction Box |
N/A A hinged door allows for easy access to all of the electrical components. Factory installed wiring simplifies installation. |
Ultra High Efficiency |
N/A High density, environmentally friendly insulation provides superior heat retention. |
Twist Lock Flange |
N/A Twist lock feature makes it easy to change elements (CSA® approved bolt-on resistor type immersion elements). |
Note |
N/A
The Commercial Electric Water Heater has blue cobalt glass fused to specially treated thicker gauge steel and high quality magnesium full length anode rods to provide the best protection available against corrosion. Ship standard 208 volts/three phase, also available in 240 V, 277 V, 480 V, or 600 V, single phase available for field conversion. |
