Print Back
Unit of Measure

Specifications

Manufacturer

Bradford White®

Capacity

6 U.S. gal5 Imp. gal23 L

Approximate Shipping Weight

33 lb15 kg

Power

2500 W

Voltage

120 V208 V240 V277 V480 V

Phase

Single

Test Pressure

300 psi2068 kPa

Working Pressure

150 psi1034 kPa

Water Connection

3/4 in19 mm

Electrical Connection

3/4 in19 mm

Type

Electric

Style

Light-Duty Utility

Size

C

Industry Standards

ASHRAE 90.1b (Current Standards) C.E.C. Listed CSA® Certified

Maximum Recovery

Recovery at 60 ºF Temperature Rise

17 gal/h

Recovery at 80 ºF Temperature Rise

13 gal/h

Recovery at 90 ºF Temperature Rise

11 gal/h

Recovery at 100 ºF Temperature Rise

6 U.S. gal/h5 Imp. gal/h10 gal/h

Recovery at 120 ºF Temperature Rise

9 gal/h

Recovery at 56 ºC Temperature Rise

23 L/h

Dimensions

Schematic


Schematic Drawing for Light Duty Commercial Utility Energy Saver Electric Water Heaters (6, 12, 20, 30 gal Models)

Floor to Heater Top A

16-1/2 in419 mm

Jacket Diameter B

14 in356 mm

Floor to Hot Water Connection C

10-1/8 in257 mm

Floor to T and P Connection D

10-1/8 in257 mm

Floor to Cold Water Connection E

3-1/8 in79 mm

Floor to Anode Rod F

16-1/2 in444 mm

Floor to Electrical Access G

17-3/4 in450 mm

Features

Features

  • Fully Automatic Controls - Fast acting surface-mount thermostat for automatic temperature control. Factory installed sensitive manual reset energy cut-off for safety to prevent overheating. (Maximum thermostat setting is 160 ºF.)
  • Direct Heat Transfer with a Single Immersed Element - Transfers heat directly and efficiently to the water. Screw-in style element.
  • Vitraglas® Lining - Bradford White tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water. This formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600 ºF (871 ºC).
  • 1" Non-CFC Foam Insulation - Covers the sides and top of tank, reducing the amount of heat loss. This results in less energy consumption, improved operation efficiencies and jacket rigidity.
  • Water Connections - 3/4" NPT factory installed true dielectric fittings extend water heater life and eases installation. Located on the side for easier installation.
  • Alternate Top Water Connections - The 6 and 12 gallon models have alternate 3/4" water connection tappings on top.
  • Protective Magnesium Anode Rod - Provides added protection against corrosion for long trouble-free service.
  • Steel Tank - Heavy gauge steel automatically formed, rolled and welded.
  • Voltages Available - 120 V, 208 V, 240 V, 277 V, 480 V.
  • Single Phase Operation Only.
  • T & P Relief Valve Installed - All models have special tapping on side of tank.

General Information

General Information

All models ETL listed. These heaters are wired Single Phase, 120 V with one 1500 W element, unless otherwise specified.

All water and electrical connections are 3/4" (19 mm) NPT.

All models certified at 300 psi test pressure (2068 kPa) and 150 psi working pressure (1034 kPa).

Applicable models CSA® verified for energy performance in accordance with C191.1-M90.

Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.

Warranty

Warranty

  • 5-Year Limited Tank Warranty.
  • 1-Year Limited Warranty on Component Parts.

Note

Note

Meet or exceed ASHRAE 90.1b (Current standard) C.E.C. Listed.

Maximum wattage at any voltage is 3000 W.

Single element only.

NSF Construction not available.