Print Back
Lowboy commercial electric units have a Fused Ceramic Shield applied under pressure and fired at 1600 ºF to completely cover the tank interior. This provides a tough interior surface for storage tanks and maximum protection against the wearing effects of high-volume and high temperature water.
Lowboy Commercial Electric Water Heaters
Unit of Measure
Items Lowboy Commercial Electric Water Heaters
LDCE32-30L-1500W
Lowboy Commercial Electric Water Heaters
Lowboy Commercial Electric Water Heaters
LDCE32-30L-2000W
Lowboy Commercial Electric Water Heaters
Lowboy Commercial Electric Water Heaters
LDCE32-30L-2500W
Lowboy Commercial Electric Water Heaters
Lowboy Commercial Electric Water Heaters
LDCE32-30L-3000W
Lowboy Commercial Electric Water Heaters
Lowboy Commercial Electric Water Heaters
LDCE32-30L-3500W
Lowboy Commercial Electric Water Heaters
Manufacturer N/A American® Water Heater Company
Capacity N/A 28 gal
Schematic N/A
Schematic Drawing for Lowboy Commercial Electric Water Heaters
Jacket Diameter A N/A 22 in
Height to Top of Heater B N/A 29-1/2 in
Height to Side T and P Opening C N/A 22-1/2 in
Standard Voltage N/A 240 V
Standard Input Power N/A 4.5 kW
Maximum Input Power N/A 12 kW
Phase N/A Single N/A Single N/A Single N/A Single Three N/A Single
Voltage N/A 120 V208 V240 V277 V480 V N/A 120 V208 V240 V277 V480 V N/A 120 V208 V240 V277 V480 V N/A 120 V208 V240 V277 V480 V N/A 208 V240 V277 V480 V
Element Power N/A 1500 W N/A 2000 W N/A 2500 W N/A 3000 W N/A 3500 W
Full Load Current Three Phase 208 V (All Terminals L1, L2, and L3) N/A N/A N/A N/A 14.4 A N/A
Full Load Current Three Phase 240 V (All Terminals L1, L2, and L3) N/A N/A N/A N/A 12.5 A N/A
Full Load Current Three Phase 480 V (All Terminals L1, L2, and L3) N/A N/A N/A N/A 6.3 A N/A
Full Load Current Three Phase 208 V (Terminal L3) N/A N/A N/A N/A 25 A N/A
Full Load Current Three Phase 240 V (Terminal L3) N/A N/A N/A N/A 21.7 A N/A
Full Load Current Three Phase 480 V (Terminal L3) N/A N/A N/A N/A 10.8 A N/A
Full Load Current Three Phase 208 V (Terminal L1 and L2) N/A N/A N/A N/A 14.4 A N/A
Full Load Current Three Phase 240 V (Terminal L1 and L2) N/A N/A N/A N/A 12.5 A N/A
Full Load Current Three Phase 480 V (Terminal L1 and L2) N/A N/A N/A N/A 6.3 A N/A
Operation Type N/A N/A N/A N/A Interlocking Operation Simultaneous Operation N/A
Full Load Current Single Phase 120 V N/A 12.5 A N/A 16.7 A N/A 20.8 A N/A 25 A N/A
Full Load Current Single Phase 208 V N/A 7.2 A N/A 9.6 A N/A 12 A N/A 14.4 A N/A 16.8 A
Full Load Current Single Phase 240 V N/A 6.3 A N/A 8.3 A N/A 10.4 A N/A 12.5 A N/A 14.6 A
Full Load Current Single Phase 277 V N/A 5.4 A N/A 7.2 A N/A 9 A N/A 10.8 A N/A 12.6 A
Full Load Current Single Phase 480 V N/A 3.1 A N/A 4.2 A N/A 5.2 A N/A 6.3 A N/A 7.3 A
Recovery at 40 ºF Temperature Rise N/A N/A N/A N/A 31 gal/h N/A 36 gal/h
Recovery at 50 ºF Temperature Rise N/A N/A N/A N/A 25 gal/h N/A 29 gal/h
Recovery at 60 ºF Temperature Rise N/A N/A N/A N/A 20 gal/h N/A 24 gal/h
Recovery at 70 ºF Temperature Rise N/A N/A N/A N/A 18 gal/h N/A 20 gal/h
Recovery at 80 ºF Temperature Rise N/A N/A N/A N/A 15 gal/h N/A 18 gal/h
Recovery at 90 ºF Temperature Rise N/A N/A N/A N/A 14 gal/h N/A 16 gal/h
Recovery at 100 ºF Temperature Rise N/A N/A N/A N/A 12 gal/h N/A 14 gal/h
Water Connection N/A 3/4 in
Test Pressure N/A 300 psi
Working Pressure N/A 150 psi
Style N/A Lowboy
Size N/A C
Type N/A Electric
Industry Standards N/A ASHRAE 90.1b-1992 HUD NAECA UL® 174
Features N/A
  • Dual Incoloy Heating Elements
    Screw-in, direct immersion, 4500 watt, 240 volt heating elements for maximum efficiency. Available in 120, 208, 240, 277, and 480 voltages, single-or three-phase. Multiple wattages available up to 12 kw max.
  • Non-CFC Foam Insulation
    The tank is surrounded by a thick coat of non-CFC polyurethane foam to trap heat inside the tank, saving energy.
  • Heat Traps
    Provided for inlet and outlet to reduce heat loss during standby.
  • Dip Tube
    Carries cold inlet water deep into the tank to minimize temperature dilution of hot water.
  • T & P Valve
    Conveniently located on the side of the tank to facilitate piping to a drain or external to the building. Also available with top T & P opening for field-installed top T & P valve.
  • 3/4" Water Connections
    Located on top.
  • Anode Rod
    Top-mounted, heavy-duty anode for added tank protection, extending the life of the tank.
  • Built-In Electric Junction Box
    Top-located, convenient junction box, ready for 1/2" or 3/4" conduit.
  • Thermostat/High Limit Control
    Combination control allows adjustment of water temperature up to 170 ºF. High limit factory set at 190 ºF.
  • Code Approvals
    Listed to UL 174, 1990 NAECA approved, HUD and ASHRAE 90.1b-1992. All models are certified at 300 PSI test pressure and 150 PSI working pressure.
  • Drain Valve
    Non-metallic, corrosion-free drain valve.
Warranty N/A
  • 3-Year Limited Tank Warranty / 1-Year Limited Parts Warranty.
Note N/A Limited warranty on tank and parts. Complete details in manual. Specify wattage, voltage and phase when ordering.