Water Heater Sales - Conservationist® Induced Draft Low NOx Commercial Gas Water Heaters

Unit of Measure

Items	BTN-80 Conservationist® Induced Draft Low NOx Commercial Gas Water Heaters Request Quote	BTN-100 Conservationist® Induced Draft Low NOx Commercial Gas Water Heaters Request Quote
Manufacturer	N/A A. O. Smith®
Schematic	N/A Schematic Drawing for Conservationist® Induced Draft Low NOx Gas Water Heaters
Dimension A	N/A 65-5/16 in1684 mm	N/A 71-1/4 in1810 mm
Dimension B	N/A 58-1/2 in1486 mm	N/A 66-1/2 in1689 mm
Dimension C	N/A 29-5/8 in753 mm	N/A 30-3/4 in781 mm
Dimension D	N/A 25-3/8 in645 mm	N/A 26-1/2 in673 mm
Dimension E	N/A 15 in381 mm
Dimension F	N/A 4 in102 mm
Dimension G	N/A 14 in356 mm	N/A 14 1/2 in356 mm
Dimension H	N/A 16 in406 mm
Dimension J	N/A 1-1/4 in32 mm
Dimension K	N/A 1 in25 mm	N/A 1-1/4 in32 mm
Dimension L	N/A 1/2 in13 mm
Dimension M	N/A 11-15/16 in303 mm
Capacity	N/A 74 gal	N/A 98 gal
Type	N/A Liquid Propane Gas Natural Gas
Input Power	N/A 80000 BTU/hr23.4 kW	N/A 90000 BTU/hr26.4 kW
Recovery at 30 ºF Temperature Rise	N/A 258 gal/h	N/A 291 gal/h
Recovery at 17 ºC Temperature Rise	N/A 973 L/h	N/A 1104 L/h
Recovery at 36 ºF Temperature Rise	N/A 215 gal/h	N/A 242 gal/h
Recovery at 20 ºC Temperature Rise	N/A 814 L/h	N/A 915 L/h
Recovery at 40 ºF Degree Rise	N/A 193 gal/h	N/A 218 gal/h
Recovery at 23 ºC Temperature Rise	N/A 731 L/h	N/A 825 L/h
Recovery at 50 ºF Temperature Rise	N/A 155 gal/h	N/A 175 gal/h
Recovery at 28 ºC Temperature Rise	N/A 585 L/h	N/A 662 L/h
Recovery at 54 ºF Temperature Rise	N/A 143 gal/h	N/A 162 gal/h
Recovery at 30 ºC Temperature Rise	N/A 541 L/h	N/A 613 L/h
Recovery at 60 ºF Temperature Rise	N/A 130 gal/h	N/A 145 gal/h
Recovery at 33 ºC Temperature Rise	N/A 490 L/h	N/A 548 L/h
Recovery at 70 ºF Temperature Rise	N/A 111 gal/h	N/A 125 gal/h
Recovery at 39 ºC Temperature Rise	N/A 419 L/h	N/A 473 L/h
Recovery at 72 ºF Temperature Rise	N/A 108 gal/h	N/A 121 gal/h
Recovery at 40 ºC Temperature Rise	N/A 407 L/h	N/A 457 L/h
Recovery at 80 ºF Temperature Rise	N/A 97 gal/h	N/A 109 gal/h
Recovery at 44 ºC Temperature Rise	N/A 368 L/h	N/A 412 L/h
Recovery at 90 ºF Temperature Rise	N/A 86 gal/h	N/A 97 gal/h
Recovery at 50 ºC Temperature Rise	N/A 324 L/h	N/A 367 L/h
Recovery at 100 ºF Temperature Rise	N/A 77 gal/h	N/A 87 gal/h
Recovery at 56 ºC Temperature Rise	N/A 293 L/h	N/A 329 L/h
Recovery at 108 ºF Temperature Rise	N/A 71 gal/h	N/A 81 gal/h
Recovery at 60 ºC Temperature Rise	N/A 269 L/h	N/A 306 L/h
Recovery at 110 ºF Temperature Rise	N/A 70 gal/h	N/A 79 gal/h
Recovery at 61 ºC Temperature Rise	N/A 264 L/h	N/A 299 L/h
Recovery at 120 ºF Temperature Rise	N/A 65 gal/h	N/A 73 gal/h
Recovery at 67 ºC Temperature Rise	N/A 245 L/h	N/A 276 L/h
Recovery at 126 ºF Temperature Rise	N/A 62 gal/h	N/A 69 gal/h
Recovery at 70 ºC Temperature Rise	N/A 233 L/h	N/A 261 L/h
Recovery at 130 ºF Temperature Rise	N/A 60 gal/h	N/A 67 gal/h
Recovery at 72 ºC Temperature Rise	N/A 225 L/h	N/A 253 L/h
Recovery at 140 ºF Temperature Rise	N/A 55 gal/h	N/A 62 gal/h
Recovery at 78 ºC Temperature Rise	N/A 209 L/h	N/A 234 L/h
Manifold Pressure	N/A For Liquid Propane Gas: 2.49 kPaFor Natural Gas: 1.12 kPaFor Liquid Propane Gas: 10 inWcFor Natural Gas: 4.5 inWc
Voltage	N/A 120 V
Frequency	N/A 60 Hz
Current	N/A <5 A
Maximum Gas Supply Pressure	N/A 14 inWc3.48 kPa
Minimum Supply Pressure for Natural Gas	N/A 1.24 kPa5 in
Minimum Supply Pressure for Liquid Propane Gas	N/A 11 inWc2.74 kPa
Industry Standards	N/A ANSI Z-21.10.3 - CSA 4.3 ASHRAE/IESNA 90.1
Features	N/A The BTN-80 and BTN-100 are equipped with a factory-mounted blower that is pre-wired. This blower produces a pre-ignition draft of make-up air prior to burner ignition and provides more efficient control of heat and helps ensure an adequate supply of make-up air. Prior to ignition, the control proves a working draft. Factory-installed Blower Control proves draft prior to ignition No draft hood or barometric damper required Blower is factory mounted with a 6-foot power cord: requires 120 V, 3 amp or less electrical system connection Intelli-Vent™ Gas Control Equipped with nearly indestructible silicon nitride hot surface igniter Advanced electronics for more precise control of water temperature Easy-to-understand system diagnostics Rated as Category I Appliance Category I appliance: uses standard metal, single-wall or "B"-type vent Can be commonly vented with other Category I appliances Vent connects directly to blower outlet Fully Automatic Control System Auto reset gas shutoff device prevents excessive water temperature Adjustable thermostat with 120 to 180 ºF range Gas pressure regulator Factory Equipped With Dual Burners Glass Lined Tank Exclusive CoreGard™ anode rods with stainless steel core provide additional corrosion protection Handhole Cleanout Allows easy access to tank interior for cleaning Conservationist® Btn Options Optional Leg Kit To Meet Nsf Standard 5 (Part # 9006645005 BTN 80 & 100) Intelli-Vent™ is a registered trademark of Emerson Electric Company.
Options	N/A Conservationist® Btn Options Optional Leg Kit to Meet NSF Standard 5 (Part # 9006645005 BTN 80 & 100) Intelli-Vent™ is a registered trademark of Emerson Electric Company.
Testing and Certifications	N/A CSA® Certified and ASME Rated T&P Relief Valve Codes and Standards Design-certified according to ANSI Z21.10.3-CSA® 4.3 standards governing storage-type water heaters California Energy Commission Meets the thermal efficiency and standby loss requirements of the U.S. Department of Energy and current edition of ASHRAE/IESNA 90.1 Design-certified by Underwriters Laboratories Certified for use on combustible flooring Complies with Texas Low Nox and Air Quality Management Districts with requirements of less than 40 ng/j
Warranty	N/A 3-Year Limited Tank Warranty.
Note	N/A Note for Recovery: Recovery capacity based on 80% thermal efficiency. Note for Gas and Electrical Characteristics: Minimum pressures must be maintained under both load and no load (static and dynamic) conditions.