Catalog
Request Information
Sandblaster ® Booster commercial gas water heaters are designed to provide high temperature water (usually 180 ºF) to commercial dishwashers. In these applications, the booster water heater is installed in conjunction with a standard water heater, which delivers lower-temperature water to serve the non-dishwashing needs of a restaurant or other foodservice application.
Unit of Measure

Specifications

Manufacturer

 N/A State®

Capacity

 N/A 32 gal

Input Power

 N/A 150000 BTU/hr

First Hour Rating at 100 ºF Temperature Rise

 N/A 167 gal

Gas Connection

 N/A 3/4 in

Water Connection

 N/A 1-1/2 in

Approximate Shipping Weight

 N/A 400 lb

Maximum Hydrostatic Working Pressure

 N/A 150 psi

Thermal Efficiency

 N/A 80 %

Style

 N/A Sandblaster® Booster Model

Size

 N/A C

Type

 N/A Liquid Propane Gas Natural Gas

Industry Standards

 N/A AHRI Certified® ANSI Z-21.10.3 - CSA 4.3 ASHRAE/IESNA 90.1 ASME Certified CSA® Certified UL® Listed

Maximum Recovery

Recovery at 40 ºF Temperature Rise

 N/A 364 gal/h

Recovery at 100 ºF Temperature Rise

 N/A 145 gal/h

Recovery at 140 ºF Temperature Rise

 N/A 104 gal/h

Dimensions

Schematic

 N/A
Schematic Drawing for Sandblaster® Booster Models Self-Cleaning Commercial Gas Water Heaters

Dimension A

 N/A 45 in

Dimension B

 N/A 40 in

Dimension C

 N/A 27-3/4 in

Dimension D

 N/A 32-1/4 in

Dimension E

 N/A 15-3/4 in

Dimension F

 N/A 5 in

Dimension G

 N/A 6-1/2 in

Dimension H

 N/A 6 in

Features

Features

 N/A State Hydro Cannon™ Self-Cleaning Device
  • Significantly reduces buildup of lime, sand and other sediment in the tank.
  • Helps water heaters retain their rated efficiency longer and reduce water heating costs.
Induced-Draft Design
  • Built-in blower produces power-induced draft of makeup air prior to burner ignition, for more efficient control of heat through the flue collector.
  • Eliminates performance problems caused by negative indoor air pressure.
  • Requires no draft hood or barometric damper.
Rated as Category 1 Appliance
  • Can be commonly vented with other Category 1 appliances, using standard metal type "B" vent.
Multiple Anode Rods
  • Protect tank from corrosion.
Three Water Connection Options
  • Hot water outlet located on the top and both hot and cold water inlets are on the front of the water heater.
  • Hydro Cannon device operates when front cold water connection is used.
Intermittent Electronic Ignition
  • Provides flame failure response in less than one second.
  • Includes power ON/OFF switch.
  • Eliminates standing pilot.

Testing and Certifications

Testing and Certifications

 N/A
  • CSA® Certified and ASME Rated T&P Relief Valve
  • Meets the thermal efficiency and standby loss requirements of the U.S. Department of Energy and Current Edition ASHRAE/IESNA 90.1