Catalog
Request Information
SPIDERfire® is a family of ultra high efficiency commercial gas water heaters with up to a 97 percent thermal efficiency.
Unit of Measure

Specifications

Manufacturer

 N/A Rheem®

Type

 N/A Liquid Propane Gas Natural Gas

Input Power

 N/A 160000 BTU/hr

Thermal Efficiency

 N/A 95 %

Voltage

 N/A 120 V

Vent Size

 N/A 2 in3 in4 in

Capacity

 N/A 100 gal379 L

Inlet Water Connection

 N/A 2 in. NPT

Outlet Water Connection

 N/A 2 in. NPT

Approximate Shipping Weight

 N/A 765 lb

Maximum Set Point Temperature

 N/A 185 ºF

Equipment Grade

 N/A Commercial

Minimum to Recovery Contents

 N/A 33

Industry Standards

 N/A AHRI Certified® ANSI Standards Z-21.10.3 ASHRAE Standards ASME Optional CSA® Certified Energy Star UL® Listed

Maximum Recovery (ºF)

Recovery at 40 ºF Temperature Rise

 N/A 461 gal/h

Recovery at 50 ºF Temperature Rise

 N/A 368 gal/h

Recovery at 60 ºF Temperature Rise

 N/A 307 gal/h

Recovery at 70 ºF Temperature Rise

 N/A 263 gal/h

Recovery at 80 ºF Temperature Rise

 N/A 230 gal/h

Recovery at 90 ºF Temperature Rise

 N/A 205 gal/h

Recovery at 100 ºF Temperature Rise

 N/A 184 gal/h

Recovery at 110 ºF Temperature Rise

 N/A 167 gal/h

Recovery at 120 ºF Temperature Rise

 N/A 154 gal/h

Recovery at 130 ºF Temperature Rise

 N/A 142 gal/h

Recovery at 140 ºF Temperature Rise

 N/A 132 gal/h

Maximum Recovery (ºC)

Recovery at 22 ºC Temperature Rise

 N/A 1746 L/h

Recovery at 28 ºC Temperature Rise

 N/A 1397 L/h

Recovery at 33 ºC Temperature Rise

 N/A 1164 L/h

Recovery at 39 ºC Temperature Rise

 N/A 998 L/h

Recovery at 45 ºC Temperature Rise

 N/A 873 L/h

Recovery at 50 ºC Temperature Rise

 N/A 776 L/h

Recovery at 56 ºC Temperature Rise

 N/A 698 L/h

Recovery at 61 ºC Temperature Rise

 N/A 635 L/h

Recovery at 67 ºC Temperature Rise

 N/A 582 L/h

Recovery at 72 ºC Temperature Rise

 N/A 537 L/h

Recovery at 78 ºC Temperature Rise

 N/A 499 L/h

Maximum Delivery

Maximum Delivery at 100 ºF (5 Minutes)

 N/A 85 U.S. gal

Maximum Delivery at 56 ºC (5 Minutes)

 N/A 323 L

Maximum Delivery at 100 ºF (10 Minutes)

 N/A 101 U.S. gal

Maximum Delivery at 56 ºC (10 Minutes)

 N/A 382 L

Maximum Delivery at 100 ºF (15 Minutes)

 N/A 116 U.S. gal

Maximum Delivery at 56 ºC (15 Minutes)

 N/A 440 L

Maximum Delivery at 100 ºF (20 Minutes)

 N/A 131 U.S. gal

Maximum Delivery at 56 ºC (20 Minutes)

 N/A 498 L

Maximum Delivery at 100 ºF (30 Minutes)

 N/A 162 U.S. gal

Maximum Delivery at 56 ºC (30 Minutes)

 N/A 614 L

Maximum Delivery at 100 ºF (45 Minutes)

 N/A 208 U.S. gal

Maximum Delivery at 56 ºC (45 Minutes)

 N/A 789 L

Maximum Delivery at 100 ºF (1 Hour)

 N/A 254 U.S. gal

Maximum Delivery at 56 ºC (1 Hour)

 N/A 964 L

Maximum Delivery at 100 ºF (2 Hours)

 N/A 438 U.S. gal

Maximum Delivery at 56 ºC (2 Hours)

 N/A 1662 L

Maximum Delivery at 100 ºF (3 Hours)

 N/A 623 U.S. gal

Maximum Delivery at 56 ºC (3 Hours)

 N/A 2360 L

Dimensions

Schematic

 N/A
Schematic Drawing for SPIDERfire® Ultra High Efficiency Commercial Gas Water Heaters

Dimension A

 N/A 78-3/4 in2001 mm

Dimension B

 N/A 26-1/4 in667 mm

Dimension C

 N/A 66 in1674 mm

Dimension D

 N/A 12-3/4 in324 mm

Dimension E

 N/A 73-3/4 in1873 mm

Dimension F

 N/A 73-5/8 in1869 mm

Dimension G

 N/A 72 in1829 mm

Dimension H

 N/A 66-7/16 in1687 mm

Clearances to Combustibles

Top Clearance to Combustibles

 N/A 6 in

Features and Benefits

Features and Benefits

 N/A The advanced line of 80 and 100-gallon Rheem® SPIDERfire® condensing water heaters offers breakthrough technology. It provides up to 97% thermal efficiency. The patented heat transfer system dramatically cuts fuel costs and is built to last. Models are available that range from 130,000-399,900 Btu/h, with a maximum temperature setting of 185 degrees.

Faster, Less Costly Venting
All models vent with standard -2", -3", -4", or -6" diameter PVC plastic pipe. SPIDERfire®'s built-in exhaust riser vents at the top and eliminates the need to construct a side riser.

Smart LCD Control System
The new diagnostic system is standard on all SPIDERfire® models. It enables installers and service technicians to monitor key functions and components. It includes a scrollable, operational history.

Innovative Technology
The heart of the SPIDERfire® is its patented multi-leg, triple pass heat exchanger. The system is engineered as a 'wet base' design wherein the entire heat exchanger is submerged. That eliminates hot spots found in some other fully condensing water heaters. When hot spots are eliminated, the life of the product is extended and efficiency is maximized. These products are built to last.

Power or Power Direct Vent
It can be installed as a power-vented product; or as a power direct-vented product - the latter for negative air pressure or if indoor air quality is a concern.

Corrosion Protection
Three-pass heat exchanger tubes are coated inside and out with a specially formulated porcelain enamel designed to protect against condensation.

Multiple Water Connections
Hot and cold water Inlets and outlets on both sides of the unit; 2" NPT high-flow connections.

Full-port, Full-flow Drain Valve
Factory installed brass drain valve allows for faster draining and servicing.

Advanced Burner Design
Latest models have increased burner surface area for ultra smooth ignition and quiet operation.

Direct Spark Ignition System
Energy saving ignition that ignites pilot only when there is a call for heat.

Testing and Certifications

Testing and Certifications

 N/A Altitude Certification
Certified up to 8,999 feet

CSA®/ASME Rated T&P Valve
Factory installed relief valve

For Canadian Installations, Please Use ULC-S636 PVC or CPVC Pipe

General Information

General Information

 N/A Efficiency
All models tested according to ANSI test procedures, and meet or exceed the thermal efficiency and standby loss requirements of ASHRAE standard (EPact). Also exceeds energy efficiency codes of all states including California Energy Commission (CEC).

Safety and Construction
Design certified by CSA: For operation at 185 degrees; meets all safety and construction requirement of ANSI Z-21.10.3; as an automatic storage or instantaneous water heater; as an automatic circulating tank water heater; and for operation on combustible floors and in alcove installations. Certified for 150 PSI maximum working pressure (160 PSI for ASME models).

Optional Construction
ASME construction is available on designated models. UL Sanitation (NSF5) compliant models are available when equipped with optional seal kit (Part No. AS42690).

Warranty

Warranty

 N/A
  • 3-Year limited Tank Warranty, Upgradeable to 5-Year Warranty.

Note

Note

 N/A 0" clearance to all combustible surfaces on Sides; 6" top clearance for 130 to 300 models; 8" for 350 to 400 models.

Models with inputs of 130,000 btu/h thru 199,000 btu/h are certified to vent with 2" schedule 40 PVC, CPVC or ABS pipe.

Overall width is 27-5/16" due to exhaust cover.