Catalog
Request Information
Unit of Measure

Specifications

Manufacturer

 N/A American Standard®

Capacity

 N/A 30 gal

First Hour Rating

 N/A 55 gal

Input Power

 N/A 35000 BTU/hr

Energy Factor

 N/A 0.61

R Factor

 N/A 8

Approximate Shipping Weight

 N/A 127 lb

Model Type

 N/A Short Lowboy

Test Pressure

 N/A 300 psi

Working Pressure

 N/A 150 psi

Size

 N/A R

Type

 N/A Natural Gas

Industry Standards

 N/A C.E.C. Listed CSA® Certified NAECA

Maximum Recovery

Recovery at 90 ºF Temperature Rise1 N/A 38 gal/h

Dimensions

Schematic

 N/A
Schematic Drawing for Ultra-Low NOx Natural Gas Water Heaters

Vent Diameter A

 N/A 3 in

Jacket Diameter B

 N/A 18-1/4 in

Height to Top of Heater C

 N/A 46-3/4 in

Height to Top Water D

 N/A 48-1/2 in

Height to Side T and P E

 N/A 41 in

Height to Top of Vent F

 N/A 49-3/4 in

Water Spread G

 N/A 8 in

Features

Features

 N/A
  • Ultra-low NOx Burner - Complies with Southern California SCAQMD 2008 Rule 1121 and Northern California BAAQMD 2009 10ng/J NOx emissions requirements.
  • Vaporshield Technology - Shuts off gas and air supply to heater to prevent prolonged vapor burn in combustion chamber should accidental or unattended ignition of flammable vapors occur outside the water heater.
  • Piezo Igniter - Affords push button pilot lighting in lieu of matches.
  • Maintenance Free - No periodic cleaning of combustion air inlet necessary under normal conditions.
  • Standard Thermocouple - Design provides for use of either factory supplied thermocouple or standard replacement thermocouple.
  • Self-cleaning - Turbulence inducing cold water inlet-tube engineered to diminish hard water area sediment deposits.
  • Non-CFC Foam Insulated - Saves energy and reduces fuel costs by maximizing heat retention.
  • High Efficiency Models - meet energy-efficiency 0.62 EF (Energy Factor) requirements of many gas utility rebate programs and comply with CEC Title 24.
  • Heavy Gauge Steel Tank - For extra years of trouble-free service.
  • Glass-lined Tank - Inner tank glass-lined with Dura-Glas™ and fired at 1600 ºF for optimum protection from the effects of corrosion.
  • Magnesium Anode Rod - To protect tank life.
  • Factory Installed Dielectric Hot and Cold Water Connections - 3/4" NPT water connections to extend tank life and for easier installations.
  • Brass Drain Valve - Durable to prevent unintentional breakage.
  • Factory Installed Heat Traps - Reduces standby heat loss in water piping.
  • Temperature and Pressure Relief Valve - Factory provided T & P Valve can be relocated from side to optional top opening.
  • Factory Installed Energy Cut-off System - Automatic thermostat with built-in gas pressure regulation also incorporates energy cutoff switch to prevent abnormally high water temperature for added safety.
  • Design Certified by CSA International - To meet or exceed ANSI requirements and tested in accordance with D.O.E. test procedures and meets or exceeds the energy efficiency requirements of NAECA, ASHRAE and all state energy efficiency standards.

General Information

General Information

 N/A
  • All models meet SCAQMD 2008 Rule 1121 and Northern California BAAQMD 2009 10ng/J NOx emissions requirements.
  • All models comply with NAECA requirements and are CEC listed.
  • Recovery capacity based on actual performance tests.
  • All models are certified at 300 psi test pressure and 150 psi working pressure.
  • Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.

Warranty

Warranty

 N/A
  • Choice of 6-Year Limited Tank Warranty
  • Includes 6-Year Limited Warranty on Component Parts.

Note

Note

 N/A Available in 30, 40 & 50 Gallon Tall Models and 30, 40, & 50 Gallon Short Models.
  • 1 Recovery capacity based on actual performance tests.