Catalog
Request Information
Unit of Measure

Specifications

Manufacturer

 N/A Bradford White®

Capacity

 N/A 12 U.S. gal10 Imp. gal45 L

Approximate Shipping Weight

 N/A 48 lb22 kg

Power

 N/A 6000 W

Voltage

 N/A 208 V240 V277 V480 V

Phase

 N/A Single

Test Pressure

 N/A 300 psi2068 kPa

Working Pressure

 N/A 150 psi1034 kPa

Electrical Connection

 N/A 3/4 in19 mm

Type

 N/A Electric

Style

 N/A Light-Duty Commercial Wall Hung

Size

 N/A C

Industry Standards

 N/A ASHRAE 90.1b (Current Standards) C.E.C. Listed CSA® Certified

Maximum Recovery

Recovery at 60 ºF Temperature Rise

 N/A 41 gal/h

Recovery at 80 ºF Temperature Rise

 N/A 31 gal/h

Recovery at 90 ºF Temperature Rise

 N/A 28 gal/h

Recovery at 100 ºF Temperature Rise

 N/A 6 U.S. gal/h5 Imp. gal/h25 gal/h

Recovery at 120 ºF Temperature Rise

 N/A 21 gal/h

Recovery at 56 ºC Temperature Rise

 N/A 23 L/h

Dimensions

Schematic

 N/A
Schematic Drawing for Light Duty Commercial Wall Hung Energy Saver Electric Water Heaters

Height A

 N/A 16-3/8 in416 mm

Jacket Diameter B

 N/A 18 in457 mm

Wall to Front C

 N/A 18-5/8 in473 mm

Height to Bracket D

 N/A 12-3/4 in314 mm

Height to T and P Connection E

 N/A 12-1/2 in317 mm

Top of Heater to Electrical Access F

 N/A 19-7/8 in505 mm

Features

Features

 N/A
  • Fully Automatic Controls - Fast acting surface-mount thermostat for automatic temperature control. Factory installed sensitive manual reset energy cut-off for safety to prevent overheating.
  • Direct Heat Transfer with a Single Immersed Element - Transfers heat directly and efficiently to the water. Screw-in style element.
  • Vitraglas® Lining - Bradford White tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water. This formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600 ºF (871 ºC).
  • 1" Non-CFC Foam Insulation - Covers the sides and top of tank, reducing the amount of heat loss. This results in less energy consumption, improved operation efficiencies and jacket rigidity (30 gallon model has 2").
  • Factory Installed Heavy Duty Wall Mounting Bracket - no additional brackets or modifications required.
  • Water Connections - 3/4" NPT factory installed true dielectric fittings extend water heater life and eases installation. Located on the bottom for easier installation.
  • Protective Magnesium Anode Rod - Provides added protection against corrosion for long trouble-free service.
  • Steel Tank - Heavy gauge steel automatically formed, rolled, and welded.
  • Voltages Available - 120 V, 208 V, 240 V, 277 V, 480 V.
  • Single Phase Operation Only.
  • T&P Relief Valve - Included.

General Information

General Information

 N/A All models ETL listed. These heaters are wired Single Phase, 120 V with one 1500 W element, unless otherwise specified.

All water and electrical connections are 3/4" (19 mm) NPT.

All models certified at 300 psi test pressure (2068 kPa) and 150 psi working pressure (1034 kPa).

Applicable models CSA® verified for energy performance in accordance with C191.1-M90.

Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.

Warranty

Warranty

 N/A
  • 5-Year Limited Tank Warranty.
  • 1-Year Limited Warranty on Component Parts.

Note

Note

 N/A Meet or exceed ASHRAE 90.1b (Current Standard) C.E.C. Listed

Single element only.

NSF Construction not available.