Catalog
Unit of Measure

Specifications

Manufacturer

 Bradford White®

Capacity

 30 U.S. gal25 Imp. gal114 L
First Hour Rating1 19 gal72 L

Approximate Shipping Weight

 82 lb37 kg

Power

 5500 W

Voltage

 208 V240 V

Phase

 Single

Test Pressure

 300 psi2068 kPa

Working Pressure

 150 psi1034 kPa

Water Connection

 3/4 in19 mm

Electrical Connection

 3/4 in19 mm

Type

 Electric

Style

 Light-Duty Utility

Size

 C

Industry Standards

 ASHRAE 90.1b (Current Standards) C.E.C. Listed CSA® Certified

Maximum Recovery

Recovery at 60 ºF Temperature Rise

 38 gal/h

Recovery at 80 ºF Temperature Rise

 29 gal/h

Recovery at 90 ºF Temperature Rise

 25 gal/h

Recovery at 100 ºF Temperature Rise

 6 U.S. gal/h5 Imp. gal/h23 gal/h

Recovery at 120 ºF Temperature Rise

 19 gal/h

Recovery at 56 ºC Temperature Rise

 23 L/h

Dimensions

Schematic

Schematic Drawing for Light Duty Commercial Utility Energy Saver Electric Water Heaters (6, 12, 20, 30 gal Models)

Floor to Heater Top A

 30 in762 mm

Jacket Diameter B

 22 in557 mm

Floor to Hot Water Connection C

 23-1/2 in597 mm

Floor to T and P Connection D

 23-1/2 in59 mm

Floor to Cold Water Connection E

 4-1/2 in114 mm

Floor to Anode Rod F

 30 in787 mm

Floor to Electrical Access G

 31-1/4 in794 mm

Features

Features
  • Fully Automatic Controls - Fast acting surface-mount thermostat for automatic temperature control. Factory installed sensitive manual reset energy cut-off for safety to prevent overheating. (Maximum thermostat setting is 160 ºF.)
  • Direct Heat Transfer with a Single Immersed Element - Transfers heat directly and efficiently to the water. Screw-in style element.
  • Vitraglas® Lining - Bradford White tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water. This formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600 ºF (871 ºC).
  • 1" Non-CFC Foam Insulation - Covers the sides and top of tank, reducing the amount of heat loss. This results in less energy consumption, improved operation efficiencies and jacket rigidity.
  • Water Connections - 3/4" NPT factory installed true dielectric fittings extend water heater life and eases installation. Located on the side for easier installation.
  • Alternate Top Water Connections - The 6 and 12 gallon models have alternate 3/4" water connection tappings on top.
  • Protective Magnesium Anode Rod - Provides added protection against corrosion for long trouble-free service.
  • Steel Tank - Heavy gauge steel automatically formed, rolled and welded.
  • Voltages Available - 120 V, 208 V, 240 V, 277 V, 480 V.
  • Single Phase Operation Only.
  • T & P Relief Valve Installed - All models have special tapping on side of tank.

General Information

General Information

 All models ETL listed. These heaters are wired Single Phase, 120 V with one 1500 W element, unless otherwise specified.

All water and electrical connections are 3/4" (19 mm) NPT.

All models certified at 300 psi test pressure (2068 kPa) and 150 psi working pressure (1034 kPa).

Applicable models CSA® verified for energy performance in accordance with C191.1-M90.

Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.

Warranty

Warranty
  • 3-Year Limited Tank Warranty / 1-Year Limited Warranty on Component Parts.

Note

Note

 Meet or exceed ASHRAE 90.1b (Current standard) C.E.C. Listed.

Single element only.

NSF Construction not available.
  • 1 First Hour Rating is based on the latest AHRI Directory listings.