Catalog
Request Information
Unit of Measure

Specifications

Manufacturer

 N/A Bradford White®

Capacity

 N/A 15 U.S. gal13 Imp. gal57 L

Approximate Shipping Weight

 N/A 55 lb25 kg

Power

 N/A 5000 W

Voltage

 N/A 208 V240 V277 V480 V

Phase

 N/A Single

Test Pressure

 N/A 300 psi2068 kPa

Working Pressure

 N/A 150 psi1034 kPa

Water Connection

 N/A 3/4 in19 mm

Electrical Connection

 N/A 3/4 in19 mm

Type

 N/A Electric

Style

 N/A Light-Duty Utility

Size

 N/A C

Industry Standards

 N/A ASHRAE 90.1b (Current Standards) C.E.C. Listed CSA® Certified

Maximum Recovery

Recovery at 60 ºF Temperature Rise

 N/A 34 gal/h

Recovery at 80 ºF Temperature Rise

 N/A 26 gal/h

Recovery at 90 ºF Temperature Rise

 N/A 23 gal/h

Recovery at 100 ºF Temperature Rise

 N/A 6 U.S. gal/h5 Imp. gal/h21 gal/h

Recovery at 120 ºF Temperature Rise

 N/A 17 gal/h

Recovery at 56 ºC Temperature Rise

 N/A 26 L/h

Dimensions

Floor to Heater Top A

 N/A 20-1/4 in514 mm

Jacket Diameter B

 N/A 18 in457 mm

Floor to Hot Water Connection C

 N/A 17-3/4 in451 mm

Floor to T and P Connection D

 N/A 16-3/4 in425 mm

Floor to Cold Water Connection E

 N/A 6-1/8 in155 mm

Floor to Anode Rod F

 N/A 10-1/8 in257 mm

Floor to Electrical Access G

 N/A 12-11/16 in309 mm

Features

Features

 N/A
  • Fully Automatic Controls - Fast acting surface-mount thermostat for automatic temperature control. Factory installed sensitive manual reset energy cut-off for safety to prevent overheating. (Maximum thermostat setting is 160 ºF.)
  • Direct Heat Transfer with a Single Immersed Element - Transfers heat directly and efficiently to the water. Screw-in style element.
  • Vitraglas® Lining - Bradford White tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water. This formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600 ºF (871 ºC).
  • 1" Non-CFC Foam Insulation - Covers the sides and top of tank, reducing the amount of heat loss. This results in less energy consumption, improved operation efficiencies and jacket rigidity.
  • Water Connections - 3/4" NPT factory installed true dielectric fittings extend water heater life and eases installation. Located on the side for easier installation.
  • Alternate Top Water Connections - The 6 and 12 gallon models have alternate 3/4" water connection tappings on top.
  • Protective Magnesium Anode Rod - Provides added protection against corrosion for long trouble-free service.
  • Steel Tank - Heavy gauge steel automatically formed, rolled and welded.
  • Voltages Available - 120 V, 208 V, 240 V, 277 V, 480 V.
  • Single Phase Operation Only.
  • T & P Relief Valve Installed - All models have special tapping on side of tank.

General Information

General Information

 N/A All models ETL listed. These heaters are wired Single Phase, 120 V with one 1500 W element, unless otherwise specified.

All water and electrical connections are 3/4" (19 mm) NPT.

All models certified at 300 psi test pressure (2068 kPa) and 150 psi working pressure (1034 kPa).

Applicable models CSA® verified for energy performance in accordance with C191.1-M90.

Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.

Warranty

Warranty

 N/A
  • 5-Year Limited Tank Warranty.
  • 1-Year Limited Warranty on Component Parts.

Note

Note

 N/A Meet or exceed ASHRAE 90.1b (Current standard) C.E.C. Listed.

Single element only.

NSF Construction not available.