Water Heater Sales - Titan™ Commercial Gas Water Heaters

Request Information

Unit of Measure

Items	GPG 81 140NE Titan™ Commercial Gas Water Heaters Request Quote	GPG 81 140NEA Titan™ Commercial Gas Water Heaters Request Quote	GPG 81 199NE Titan™ Commercial Gas Water Heaters Request Quote	GPG 81 199NEA Titan™ Commercial Gas Water Heaters Request Quote	GPG 81 270NE Titan™ Commercial Gas Water Heaters Request Quote
Manufacturer	N/A State®
Storage Capacity	N/A 81 U.S. gal
Input Power	N/A 140000 BTU/hr	N/A 140000 BTU/hr	N/A 199000 BTU/hr	N/A 199000 BTU/hr	N/A 270000 BTU/hr
First Hour Rating	N/A 193 gal	N/A 193 gal	N/A 250 gal	N/A 250 gal	N/A 319 gal
Recovery at 80 ºF Temperature Rise	N/A 168 gal	N/A 168 gal	N/A 238 gal	N/A 238 gal	N/A 324 gal
Recovery at 100 ºF Temperature Rise	N/A 136 gal	N/A 136 gal	N/A 193 gal	N/A 193 gal	N/A 262 gal
Recovery at 140 ºF Temperature Rise	N/A 97 gal	N/A 97 gal	N/A 138 gal	N/A 138 gal	N/A 187 gal
Schematic	N/A Schematic Drawing for Titan™ Commercial Gas Water Heaters
Dimension A	N/A 74-3/4 in
Dimension B	N/A 65 in
Dimension C	N/A 26-3/4 in
Dimension D	N/A 6 in
Dimension E	N/A 21-3/8 in
Dimension G	N/A 27-3/4 in
Dimension H	N/A 38 in
Dimension J	N/A 85-1/4 in
Gas Connection	N/A 1/2 in	N/A 1/2 in	N/A 1/2 in	N/A 1/2 in	N/A 3/4 in
Approximate Shipping Weight	N/A 556 lb	N/A 658 lb	N/A 545 lb	N/A 635 lb	N/A 547 lb
Inlet Water Connection	N/A 1-1/2 in
Outlet Water Connection	N/A 1-1/2
Thermal Efficiency	N/A 80 %
Working Pressure	N/A 160 psi
Style	N/A State Titan®
Size	N/A C
Type	N/A Natural Gas
Industry Standards	N/A ASHRAE 90.1b-1992 ASME Certified C.E.C. Listed UL® Listed
Features	N/A Meets ASHRAE 90.1b-1992, and C.E.C. and New York Codes for thermal efficiency and standby loss. Glass-Lined Tank - Exclusive corrosion protection with glass-lining. Multiple anodes provide corrosion protection. Power Gas Burner - Electronic flame monitoring with direct spark ignition. For added safety, all units are equipped with redundant gas valves. Power gas burner requires 120 volt 60 Hz service. A negative draft is required in the vent piping. This is not a forced draft burner. Fully Automatic Controls - Safety shut off, high temperature limit control, dual thermostat (adjustable 120 ºF thru 180 ºF) for accurate temperature control. Maximum inlet gas pressure 14" W.C. Foam Insulation - Saves fuel, helps reduce standby heat loss. Jacket - made of heavy gauge steel with baked enamel finish over bonderized undercoat. Fully Certified by U.L. ASME Construction - Available on GPG81 140, GPG81 199, GPG81 270 & GPG81 370. When specifying ASME construction, add the letter A" at the end of the model number. 160 psi working pressure. A.G.A./ASME Rated Temperature & Pressure Relief Valve - Factory installed. Barometric Draft Damper - To ensure proper draft for maximum efficiency. Easy Cleaning - Handhole cleanout(s) allows easy cleaning. Professional Startup Service - Furnished to assure most efficient combustion and safe initial operation.
Limited Warranty Outline	N/A If the tank should leak any time during the first three years, under the terms of the warranty, State Water Heaters will furnish a replacement heater; installation, labor, handling and local delivery extra. NOTE: This Outline is NOT a Warranty. For complete information, consult the written warranty or State Water Heaters.
Other Features	N/A Two layers of high temperature ceramic fiber insulation in combustion chamber Flame inspection port opening Mounted on rugged channel iron skids Multiple anodes for protection
Options	N/A Illinois School Code on GPG81 199 to GPG81 370 National Board Registration (ASME models only) Low water cutoff 5 or 10 year extended limited warranty ASME (ON SELECTED MODELS)
Note	N/A CAUTION: Unit must be installed on non-combustible surface. To compensate for the effects of high altitude areas above 2000 feet, recovery capacities should be reduced approximately 4% for every 1000 feet above sea level. Above capacities are based on actual efficiencies obtained in engineering laboratories.