Catalog
Request Information Search by Specification
Unit of Measure
Items
Image

Light Duty Commercial Utility Energy Saver Electric Water Heaters
Image

Light Duty Commercial Utility Energy Saver Electric Water Heaters
Image

Light Duty Commercial Utility Energy Saver Electric Water Heaters
Image

Light Duty Commercial Utility Energy Saver Electric Water Heaters
Image

Light Duty Commercial Utility Energy Saver Electric Water Heaters
Manufacturer N/A Bradford White®
Capacity N/A 6 U.S. gal5 Imp. gal23 L
First Hour Rating1 N/A
Recovery at 60 ºF Temperature Rise N/A 10 gal/h N/A 14 gal/h N/A 17 gal/h N/A 21 gal/h N/A 24 gal/h
Recovery at 80 ºF Temperature Rise N/A 8 gal/h N/A 10 gal/h N/A 13 gal/h N/A 15 gal/h N/A 18 gal/h
Recovery at 90 ºF Temperature Rise N/A 7 gal/h N/A 9 gal/h N/A 11 gal/h N/A 14 gal/h N/A 16 gal/h
Recovery at 100 ºF Temperature Rise
N/A 6 U.S. gal/h5 Imp. gal/h6 gal/h N/A 6 U.S. gal/h5 Imp. gal/h8 gal/h N/A 6 U.S. gal/h5 Imp. gal/h10 gal/h N/A 6 U.S. gal/h5 Imp. gal/h12 gal/h N/A 6 U.S. gal/h5 Imp. gal/h14 gal/h
Recovery at 120 ºF Temperature Rise N/A 5 gal/h N/A 7 gal/h N/A 9 gal/h N/A 10 gal/h N/A 12 gal/h
Recovery at 56 ºC Temperature Rise
N/A 23 L/h
Schematic N/A
Schematic Drawing for Light Duty Commercial Utility Energy Saver Electric Water Heaters (6, 12, 20, 30 gal Models)
Floor to Heater Top A N/A 16-1/2 in419 mm
Jacket Diameter B N/A 14 in356 mm
Floor to Hot Water Connection C N/A 10-1/8 in257 mm
Floor to T and P Connection D N/A 10-1/8 in257 mm
Floor to Cold Water Connection E N/A 3-1/8 in79 mm
Floor to Anode Rod F N/A 16-1/2 in444 mm
Floor to Electrical Access G N/A 17-3/4 in450 mm
Approximate Shipping Weight N/A 33 lb15 kg
Power N/A 1500 W N/A 2000 W N/A 2500 W N/A 3000 W N/A 3500 W
Voltage N/A 120 V208 V240 V277 V480 V N/A 120 V208 V240 V277 V480 V N/A 120 V208 V240 V277 V480 V N/A 120 V208 V240 V277 V480 V N/A 208 V240 V
Phase N/A Single
Test Pressure N/A 300 psi2068 kPa
Working Pressure N/A 150 psi1034 kPa
Water Connection N/A 3/4 in19 mm
Electrical Connection N/A 3/4 in19 mm
Type N/A Electric
Style N/A Light-Duty Utility
Size N/A C
Industry Standards N/A ASHRAE 90.1b (Current Standards) C.E.C. Listed CSA® Certified
Features N/A
  • Fully Automatic Controls - Fast acting surface-mount thermostat for automatic temperature control. Factory installed sensitive manual reset energy cut-off for safety to prevent overheating. (Maximum thermostat setting is 160 ºF.)
  • Direct Heat Transfer with a Single Immersed Element - Transfers heat directly and efficiently to the water. Screw-in style element.
  • Vitraglas® Lining - Bradford White tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water. This formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600 ºF (871 ºC).
  • 1" Non-CFC Foam Insulation - Covers the sides and top of tank, reducing the amount of heat loss. This results in less energy consumption, improved operation efficiencies and jacket rigidity.
  • Water Connections - 3/4" NPT factory installed true dielectric fittings extend water heater life and eases installation. Located on the side for easier installation.
  • Alternate Top Water Connections - The 6 and 12 gallon models have alternate 3/4" water connection tappings on top.
  • Protective Magnesium Anode Rod - Provides added protection against corrosion for long trouble-free service.
  • Steel Tank - Heavy gauge steel automatically formed, rolled and welded.
  • Voltages Available - 120 V, 208 V, 240 V, 277 V, 480 V.
  • Single Phase Operation Only.
  • T & P Relief Valve Installed - All models have special tapping on side of tank.
General Information N/A All models ETL listed. These heaters are wired Single Phase, 120 V with one 1500 W element, unless otherwise specified.

All water and electrical connections are 3/4" (19 mm) NPT.

All models certified at 300 psi test pressure (2068 kPa) and 150 psi working pressure (1034 kPa).

Applicable models CSA® verified for energy performance in accordance with C191.1-M90.

Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.
Warranty N/A
  • 3-Year Limited Tank Warranty / 1-Year Limited Warranty on Component Parts.
Note N/A Meet or exceed ASHRAE 90.1b (Current standard) C.E.C. Listed.

Maximum wattage at any voltage is 3000 W.

Single element only.

NSF Construction not available.
  • 1 First Hour Rating is based on the latest AHRI Directory listings.