Water Heater Sales - Commercial Medium Duty-3 Element Energy Saver Electric Water Heaters

Request Information Search by Specification

Unit of Measure

Items	E32-50S-3-6 Commercial Medium Duty-3 Element Energy Saver Electric Water Heaters Request Quote	E32-50S-3-9 Commercial Medium Duty-3 Element Energy Saver Electric Water Heaters Request Quote	E32-50S-3-12 Commercial Medium Duty-3 Element Energy Saver Electric Water Heaters Request Quote	E32-50S-3-13.5 Commercial Medium Duty-3 Element Energy Saver Electric Water Heaters Request Quote	E32-50S-3-15 Commercial Medium Duty-3 Element Energy Saver Electric Water Heaters Request Quote
Manufacturer	N/A Bradford White®
Capacity	N/A 50 U.S. gal42 Imp. gal189 L
Recovery at 40 ºF Temperature Rise	N/A 62 gal/h	N/A 93 gal/h	N/A 124 gal/h	N/A 139 gal/h	N/A 155 gal/h
Recovery at 100 ºF Temperature Rise	N/A 74 U.S. gal/h62 Imp. gal/h25 gal/h	N/A 74 U.S. gal/h62 Imp. gal/h37 gal/h	N/A 74 U.S. gal/h62 Imp. gal/h50 gal/h	N/A 74 U.S. gal/h62 Imp. gal/h56 gal/h	N/A 74 U.S. gal/h62 Imp. gal/h62 gal/h
Recovery at 140 ºF Temperature Rise	N/A 18 gal/h	N/A 27 gal/h	N/A 35 gal/h	N/A 40 gal/h	N/A 44 gal/h
Recovery at 56 ºC Temperature Rise	N/A 280 L/h
Schematic	N/A Schematic Drawing for Commercial Medium Duty-3 Element Energy Saver Electric Water Heaters
Floor to Heater Top A	N/A 46-1/2 in1181 mm
Jacket Diameter B	N/A 22 in559 mm
Floor to Water Connection C	N/A 47-1/2 in1207 mm
Floor to T and P Connection D	N/A 47-5/8 in1210 mm
Floor to Control Box E	N/A 44-7/8 in1140 mm
Control Box to Back of Heater F	N/A 24-5/8 in625 mm
Approximate Shipping Weight	N/A 137 lb62 kg
Voltage	N/A 208 V240 V277 V380 V415 V480 V
Phase	N/A Single Three
Input Power	N/A 6 kW	N/A 9 kW	N/A 12 kW	N/A 13.5 kW	N/A 15 kW
Each Element Power	N/A 2000 W	N/A 3000 W	N/A 4000 W	N/A 4500 W	N/A 5000 W
Kit Part Numbers for 208 V	N/A 265-43942-13	N/A 265-43942-14	N/A 265-43942-15	N/A 265-43942-16	N/A 265-43942-17
Kit Part Numbers for 240 V	N/A 265-43942-07	N/A 265-43942-08	N/A 265-43942-09	N/A 265-43942-10	N/A 265-43942-11
Kit Part Numbers for 480 V	N/A 265-43942-01	N/A 265-43942-02	N/A 265-43942-03	N/A 265-43942-04	N/A 265-43942-05
Full Load Current Single Phase 208 V	N/A 28.8 A	N/A 43.2 A	N/A 57.7 A	N/A 64.9 A	N/A 72.1 A
Full Load Current Three Phase 208 V	N/A 16.7 A	N/A 25.0 A	N/A 33.3 A	N/A 37.5 A	N/A 41.6 A
Full Load Current Single Phase 240 V	N/A 25 A	N/A 37.5 A	N/A 50 A	N/A 56.3 A	N/A 62.5 A
Full Load Current Three Phase 240 V	N/A 14.4 A	N/A 21.7 A	N/A 28.9 A	N/A 32.5 A	N/A 36.1 A
Full Load Current Single Phase 277 V	N/A 21.7 A	N/A 32.5 A	N/A 43.3 A	N/A 48.7 A	N/A 54.2 A
Full Load Current Single Phase 380 V	N/A 9.1 A	N/A 13.7 A	N/A 18.2 A	N/A 20.5 A	N/A 22.8 A
Full Load Current Single Phase 415 V	N/A 8.3 A	N/A 12.5 A	N/A 16.7 A	N/A 18.8 A	N/A 20.9 A
Full Load Current Single Phase 480 V	N/A 12.5 A	N/A 18.8 A	N/A 25 A	N/A 28.1 A	N/A 31.3 A
Full Load Current Three Phase 480 V	N/A 7.2 A	N/A 10.8 A	N/A 14.4 A	N/A 16.2 A	N/A 18.0 A
Test Pressure	N/A 300 psi2068 kPa
Working Pressure	N/A 150 psi1034 kPa
Style	N/A Triflex Medium-Duty
Size	N/A C
Type	N/A Electric
Industry Standards	N/A ASHRAE 90.1b (Current Standards) C.E.C. Listed CSA® Certified
Features	N/A Fully Automatic Controls - Fast acting surface-mount thermostat for automatic temperature control. Factory installed sensitive manual reset energy cut-off for safety to prevent overheating. (Maximum thermostat setting is 185 ºF.) Direct Heat Transfer with Three Immersed Incoloy Elements - Transfers heat directly and efficiently to the water. Screw-in style element. Factory Installed Hydrojet® Sediment Reduction System - Cold water inlet sediment reducing device helps prevent sediment build up in the tank. Vitraglas® Lining - Bradford White tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water. This formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600 ºF (871 ºC). 2" Non-CFC Foam Insulation - Covers the side and top of tank, reducing the amount of heat loss. This results in less energy consumption, improved operation efficiencies and jacket rigidity. Water Connections - 1-1/4" NPT factory installed true dielectric fittings extend water heater life and eases installation. Conversion Kits - Design certified by ETL for field conversion. Conversion kits are available to convert any one model to a variety of voltages, kW inputs and phase. (kit part numbers on reverse side.) Protective Magnesium Anode Rod - Provides added protection against corrosion for long trouble-free service. Steel Tank - Heavy gauge steel automatically formed, rolled and welded. T&P Relief Valve - Supplied. Low Restriction Brass Drain Valve - Durable tamper proof design.
General Information	N/A All models ETL listed. All potable water connections are 1-1/4" NPT (25 mm) on 8" (203 mm) centers. All electrical connections are 3/4" (19 mm) NPT. All models certified at 300 psi test pressure (2068 kPa) and 150 psi working pressure (1034 kPa). Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.
Warranty	N/A 3-Year Limited Tank Warranty / 1-Year Limited Warranty on Component Parts.
Note	N/A Meet or exceed ASHRAE 90.1b (current standard) C.E.C. Listed. All models are wired 240 V, 3-phase, 18 kW. Other voltages, wattages and kW are available and must be specified when ordering. NSF Construction available.